#Fluke quickmap trial

The Fiber QuickMap troubleshooter will display the distances to multiple* connection incidents all the way until the end of (or break in) the link. Obtain Critical Visibility into the Multimode Channel - Having visibility into all the connection incidents within a channel is imperative because they are where most fiber failures in enterprise environments occur. Power meters and sources are great for testing the entire channel to verify power and loss, but are inefficient for troubleshooting because the user must sequentially test a channel link-by-link, which can take several hours depending on the length of the channel and the number of links. Not only is this process time-intensive, it is also unrealistic in many data center and campus environments in which the links run underneath floor tiles, behind walls, or underground. They also require that the user maintain visual contact with the cabling while tracing its length to locate any faults. Visual fault locators, lasers, or flashlights, while easy to use, have extremely limited troubleshooting capabilities because they are unable to distinguish or locate problematic loss or reflective incidents. Tools normally used for troubleshooting are typically inefficient, ineffective, or both. Averaging six seconds of test time, it quickly provides the visibility and data necessary to locate and fix any issues with your multimode fiber cabling. Six-second Troubleshooting - The Fiber QuickMap troubleshooter, as a single-ended instrument, cuts down your troubleshooting time from hours to mere seconds. No need to fiddle with settings, fiber types, or standards. Simply turn it on, connect to the multimode link to be tested, and press the “TEST” button to obtain the channel visibility you need in order to quickly troubleshoot or verify connectivity. One-Button Testing - Fiber QuickMap can be used straight out of the box with no user-setup required. By instantly providing distances to failures such as high loss and high reflectance incidents, Fiber QuickMap is the must-have troubleshooter for any technician who works with fiber. Every technician should have tools “on their belt” capable of pinpointing the problem within seconds.įluke Networks’ Fiber QuickMap is an enterprise fiber troubleshooter that quickly and efficiently locates connections and breaks in multimode fiber.

#Fluke quickmap trial

It is no longer acceptable for the technician to spend costly time troubleshooting using a trial and error process before elevating the issue to another technician with OTDR experience. As such, the essential capability for enterprise technicians to measure and troubleshoot individual components of the overall fiber channel to prevent network downtime (or to hasten its recovery) is considered one of the Fiber Best Practices. The maximum link loss prior to the incident is <7 dB.As more OM3 and OM4 multimode fiber is installed in enterprise networks to support 10, 40, and 100 gigabit traffic, fiber infrastructure reliability has never been more critical. ± (1 m + 0.1 % x length) for reflective incidents1 ± (3 m + 0.1 % x length) for non-reflective incidents2ġm after the bulkhead connector when the bulkhead reflectance is 3 m after an incident when the incident reflectance is 10 m after the bulkhead connector or any prior incident when the bulkhead reflectance is <-35 dB and the reflectance of any prior incident is <-35 dB. Operating relative humidity (without condensation)ĩ5% (10✬ to 35✬) 75% (35✬ to 40✬) uncontrolled 11 dBĭistance accuracy (0 m to 1500 m or 0 ft to 4921 ft) Rugged construction vibration and drop tested to 1 meter.Long battery life, 1,500 tests (typical) from 2 AA alkaline batteries.Optional LC, ST and FT interchangeable adapters are available.Backlighted display turns off automatically

Change the Index of Refraction (IOR) to improve fiber length accuracy.

Six-second test time-no more blind troubleshooting that can waste hours Connect your fiber and press the Test button.

Detects live optical signals before it begins testing.

Find potential sources of high bit error rates caused by reflectance from dirty or poor connections.

Locate severe bends, high-loss splices, breaks and dirty connectors in multimode fiber.

Measure up to 4,921 feet (1,500 metres) of fiber in seconds